![]() Note: If you don’t have Apple AirPort Express, you can get one from here. So, if you want to take an existing speaker system and add a new AirPlay 2 component to it via an AirPort Express – all within your existing WiFi network and without using WiFi router capabilities of AirPort, here’s what you need to do. For WiFi, we bet you may already have a better system in place so it’s better to use AirPort Express an an adapter to add networking and AirPlay 2 capabilities to your speaker and not use it as an WiFi router. It’s for this reason why we suggest using AirPort Express solely for adding AirPlay 2 to your existing speaker system and turning off all of its WiFi router capabilities. If you have a spare AirPort Express in a box somewhere and want to be able to use it with an existing router and network setup, you’re in luck because it’s eminently possible.īut, you may also know that AirPort Express, whose primary purpose is to provide WiFi network capabilities, uses the older 802.11n tech when most newer devices and networks these days support the faster 802.11ac standard. ![]() The lineup is no more, yet AirPlay 2 support is now here regardless. You can also repeat a signal in theoory with out the cable, have not tried that though as it increases lag, halves the speed, and i have an ethernet cable where i want the router.When Apple released an update to the AirPort Express software this week, adding support for AirPlay 2, there was much surprise amongst Apple watchers who are only too aware that support for the AirPort lineup is no longer a thing Apple offers. Setup was easy, if u wanna do it that way you gotta connect the WAN port to the upstream router (assuming this is a 2012 airport, else theres only one port so use that one) Also, the fact that it is in bridge means the linksys gives out the IP addresses, allowing for faster roaming (theoretically, have not done testing in the middle of a transfer) I got mine working, Airport express connected via ethernet to linksys router, both running their own WiFi networks with the same SSID's and passwords, allowing devices to roam between them. ![]() The network mode needs to be "Create a wireless network," it should Connect Using "Ethernet," and Connection Sharing needs to be "Off (Bridge mode)." Next, when setting up the Express, just set up its Network name and Password exactly the same as the network used by your non-Apple router. Make sure that the main non-Apple router is set to share a public IP address. The newer Airport Express models (the ones compatible with 802.11n) can do this.įirst, you need the Express connected to Ethernet. Otherwise, you can setup a roaming network. ![]() However, this is only if your AirPort Express is not connected to Ethernet. Mere minutes away from long-range Wi-Fi enjoyment. Launch theĮasy-to-use AirPort Utility app on your iOS device or Mac, and you’re Near the area where you want your wireless connection. an AirPort Extreme, Time Capsule, or another AirPort Express - and Just place it in range of your primary base station Wireless network in your home and want to extend its range, AirPortĮxpress can help. Apple seems to be saying in a round-a-bout way here that other routers are not supported for wireless range extensions (with a router connected to Ethernet and the Express not): Extend an existing Wi-Fi network’s range.
0 Comments
Leave a Reply. |